![]() ![]() It is also equipped with a factory-installed automatic ice maker. The refrigerator is energy efficient, with an estimated yearly energy use of 730 kilowatt-hours. It has a sleek stainless steel exterior with a smudge-resistant finish that can be easily wiped down for cleaning. The Whirlpool WRS321SDHZ is designed with LED interior lighting that illuminates the fridge and freezer compartments. It includes a door alarm that can alert the user if the doors have been left open for too long. The refrigerator also has a temperature control system that can be adjusted using electronic controls. The dispenser features a control panel with LED lighting, a night-light mode, and a lockout function to prevent accidental dispensing. The Whirlpool WRS321SDHZ has an exterior ice and water dispenser that can provide filtered water and ice cubes, as well as crushed or cubed ice. It includes adjustable shelves in the fridge and a fixed shelf in the freezer, with several door bins in each compartment for additional storage space. The fridge compartment has a capacity of 13.6 cubic feet, while the freezer compartment has a capacity of 7.8 cubic feet. This appliance features a side-by-side configuration with a total capacity of 21.4 cubic feet. The Whirlpool WRS321SDHZ is a refrigerator designed for residential use in the United States. Refer to the "Water and Ice Dispensers" section for more details. After changing the filter, reset the filter status indicator light.Ĩ. Close the filter cover completely to secure the filter in place. The filter cover will automatically start closing as you insert the new filter.Ħ. Align the new filter with the filter housing, ensuring that the arrow is pointing to the left (towards the hinge of the filter housing), and slide it in to insert. Make sure the O-rings are still in place after removing the caps.ĥ. Take the new filter out of its packaging and remove the protective caps. Once the cover is fully open, remove the old filter by pulling it straight out.Ĥ. Be careful as the filter may come out when the cover is opened.ģ. Find the water filter in the upper right corner of the refrigerator compartment.Ģ. ![]() To change the water filter in the Whirlpool WRS321SDHZ refrigerator, follow these steps:ġ. Use a mild detergent and warm water for cleaning. Regular maintenance: To prevent mold build-up in the future, it is recommended to clean the ice dispenser and water dispenser regularly, at least once every few months. Clean the water filter: If your refrigerator has a water filter, follow the manufacturer's instructions to remove and clean or replace the filter.Ħ. Rinse with clean water and dry it thoroughly.ĥ. Pay special attention to the nozzle and surrounding areas. Clean the water dispenser: Use a soft cloth or sponge soaked in a mixture of warm water and mild detergent to clean the water dispenser area. Rinse with clean water and dry it thoroughly.Ĥ. Make sure to reach all the corners and crevices. Clean the ice dispenser chute: Use a soft cloth or sponge soaked in a mixture of warm water and mild detergent to clean the ice dispenser chute. Rinse it thoroughly and dry it before placing it back in the refrigerator.ģ. Clean the ice storage bin: Use a mild detergent and warm water to clean the ice storage bin. Use both hands to hold the base of the storage bin and lift it up and out.Ģ. Remove the ice storage bin: Press down the release lever and tilt the bucket outward. To clean the black mold build-up inside the ice dispenser and water dispenser of your Whirlpool WRS321SDHZ refrigerator, follow these steps:ġ. Please note that these instructions are general and may vary slightly depending on the specific model of your Whirlpool WRS321SDHZ refrigerator. If you need to change the water filter, refer to the instructions specific to your model. If your model has a Produce Preserver, it should be installed prior to use.Ĩ. Install the new air filter and status indicator following the instructions provided.ħ. To replace the air filter, squeeze in on the side tabs to remove the old filter. To order a replacement air filter, refer to the ordering information in the Quick Start Guide.Ħ. The disposable air filter should be replaced every 6 months or when the status indicator has completely changed from white to red. If your model does not have notches, place the indicator in a visible place that you will easily remember.ĥ. If your model has a Filter Status Indicator, activate and install it at the same time as the air filter.Ĥ. To determine if it needs to be replaced and how to replace it, please follow these steps:ģ. The air filter in the Whirlpool WRS321SDHZ refrigerator may have a different appearance depending on the model.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |